|
Donate with PayPal to help keep UKS online!
-
Dedicated Scrapper
re-newing cutting mats.
not a good title but, I have heard on the internet grapevine that you can re-new a cutting mat by spraying with repositoning glue. Has anyone tried this and if so, did you spray the card or that mat itself? I thought I'd read that you can spray the mat and it will remain sticky for a while but a friend has said that you should spray the card not the mat. Just wondered if a Robo user has done this.
Sorry if i'm going over old ground here, I don't use my robo much because the mats don't seem to last long and are expensive to replace - I may love him more if I can refresh him easily.
-
I'm a little sinner!
Not a robo user but I have done it many times with my cricut mats. Make sure the mat is completely clean (I use the sticky stuff remover to get rid of any remaining glue) let it dry naturally. Then spray with repositionable glue (each person uses different ones to their fav - crafters companion, a quilting glue, the large zig glue pens) let the mat dry naturally, condition it with your hands by patting it all over (stops it being too sticky and tearing any paper on it) and voila!!
-
Dedicated Scrapper
Spray the mat not the card. I use a cotton tea cloth to take away some of the stickiness. Just my opinion but if you use your hands any oil you may have on them would be transferred to the mat, everyone has a certain amount of oil on their hands, just think fingerprints
-
Dedicated Scrapper
I always use to spray the mat, but I have sent the CR mat through a xyron machine with a repo cartridge in and found that to be the best option.
-
Dedicated Scrapper
I washed my mat with washing-up liquid and a white sponge scourer. Left to dry. This revived it a few times.
Before you use a repro spray or put it through a Xyron. cover the edges of the mat with masking tape or such, otherwise glue on the rollers when you use it.
I found the Xyron repo glue the best and lasted months and months. Shame my Cameo mat is too big to go through.
-
Dedicated Scrapper
Originally Posted by Neries
I washed my mat with washing-up liquid and a white sponge scourer. Left to dry. This revived it a few times.
Before you use a repro spray or put it through a Xyron. cover the edges of the mat with masking tape or such, otherwise glue on the rollers when you use it.
I found the Xyron repo glue the best and lasted months and months. Shame my Cameo mat is too big to go through.
I have read that some people buy just the Xyron refill without the machine and use that
-
Dedicated Scrapper
Originally Posted by DJG
I have read that some people buy just the Xyron refill without the machine and use that
Hmmmm I wonder how they do it??????
-
Dedicated Scrapper
Originally Posted by Neries
Hmmmm I wonder how they do it??????
Wouldn't you just start at one end of the mat and roll the cartridge to the other end, just guessing here.
-
Dedicated Scrapper
Originally Posted by DJG
Wouldn't you just start at one end of the mat and roll the cartridge to the other end, just guessing here.
Doreen not sure how it would work.
The cartridge has two rolls, one of paper with the glue on, the other film. As you roll it through it sandwiches your card between and the pressure puts the glue on one side of your card. I would think a messy job to just take just the glue one out to use it.
I tried once rolling through with no card, peeling off the film and pressing the other side to card and pressing down, but no glue was transferred.
-
Dedicated Scrapper
Originally Posted by Neries
Doreen not sure how it would work.
The cartridge has two rolls, one of paper with the glue on, the other film. As you roll it through it sandwiches your card between and the pressure puts the glue on one side of your card. I would think a messy job to just take just the glue one out to use it.
I tried once rolling through with no card, peeling off the film and pressing the other side to card and pressing down, but no glue was transferred.
I have got a Xyron but think I'll stay with the spray glue or Anita's tack it over and over then
-
Dedicated Scrapper
Originally Posted by DJG
I have got a Xyron but think I'll stay with the spray glue or Anita's tack it over and over then
I will stick with repo spray too Doreen.
That is unless someones knows of a hassle free way of doing it.
-
Card maker
I found the xyron repo was too strong so am sticking to the sprays.
-
Dedicated Scrapper
Originally Posted by jenniec
I found the xyron repo was too strong so am sticking to the sprays.
Jennie I thought that the first time I used my Robo mat after passing it through the Xyron. But after I dabbed it with a piece of smooth cloth it worked perfectly and lasted me months. I then just washed it and it is still sticky enough to us. I have used that Robo mat a few times with my Cameo.
-
cards only
Originally Posted by Neries
Jennie I thought that the first time I used my Robo mat after passing it through the Xyron. But after I dabbed it with a piece of smooth cloth it worked perfectly and lasted me months. I then just washed it and it is still sticky enough to us. I have used that Robo mat a few times with my Cameo.
I also love using the Xyron, especially for the home made mats, and I agree it lasts a long long time.
Also instead of using masking tape for the edges, I use my craft knife to leave a bit of the backing paper on, instead of peeling it all off, I also leave a bit at the top and bottom as well, so the only place it is sticky is actually where the card or paper will go.
Last edited by cattiegracie; 19-03-2012 at 10:03 PM.
Reason: extra info
Grace I'm getting there, 1 step at a time
-
Dedicated Scrapper
thanks for all your replies - I still have the original edge strips for all my mats, always wondered why they were on there tbh lol so will make sure i keep them on before I spray.
one last question - when you 'remove the sticky before spraying', do you mean removing the original sticky too or just after using the repo spray? sorry if that seems dim! luckily i do have the removing spray - but only because i picked up the wrong tin in the shop
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks