Quote Originally Posted by Neries View Post
Hi Tricia,

I find if I calibrate my Silhouette 3 for print & cut I find it slightly out with my PixScan mat.

To calibrate any Silhouette machine open the send window and right click on the machine icon. Then click on Print Test Page and print it out. "Place your printed paper or card onto your cutting mat and press enter. Use the arrow keys to move your cutting blade into the first green square to the left of the black cross hairs. Then click on calibrate and it will cut the black lines. Then check if it cuts accurately in the middle of the black lines across and down. If it's out move the rulers up and down to depending how close your cut was." Repeat moving to each green square in turn until the cut line is in the middle of the black line across and down.
I did the green square thing but didn't do the ruler bit, I'll try again. Thanks a lot.